The white light on a pontoon boat goes on the top of the mast. This is so that it can be seen by other boaters and by aircraft at night. It is important to make sure that the light is properly installed and working properly, as it can help to prevent accidents.
So Where Does The White Light Go On A Pontoon Boat?
The white light on a pontoon boat should be placed at the top of the highest point of the boat. This is to ensure that it is visible from all angles, and that it does not obstruct the driver’s view.
Where Does the White Light Go on a Pontoon Boat?
The Importance of White Lights on Pontoon Boats
White lights are an important safety feature for pontoon boats. They help other boaters see you, especially at night or in low-visibility conditions. By law, pontoon boats must have at least one white light visible from a distance of at least 1,000 feet. This light should be located on the top of the boat, at the front or back.
Where to Mount the White Light on a Pontoon Boat
The best place to mount the white light on a pontoon boat is at the top of the front or back of the boat. This will ensure that the light is visible from all angles, even if the boat is listing to one side. You can also mount the light on a pole or mast, as long as it is at least 12 inches above the highest point of the boat.
How to Choose the Right White Light for Your Pontoon Boat
When choosing a white light for your pontoon boat, there are a few things to consider. First, you need to decide what type of light you want. There are two main types of white lights: incandescent and LED. Incandescent lights are less expensive, but they use more power and produce more heat. LED lights are more expensive, but they last longer and use less power.
You also need to consider the brightness of the light. The brighter the light, the more visible it will be. However, you don’t want a light that is so bright that it is blinding to other boaters. A good rule of thumb is to choose a light that has a brightness of at least 100 lumens.
Finally, you need to consider the size of the light. The size of the light will depend on the size of your pontoon boat. A small boat will need a smaller light, while a large boat will need a larger light.
How to Install the White Light on Your Pontoon Boat
Installing a white light on your pontoon boat is a relatively simple task. You will need a few tools, including a screwdriver, a drill, and a wire stripper.
First, you need to choose a location for the light. The best place is at the top of the front or back of the boat. Once you have chosen a location, you need to drill a hole in the boat. The hole should be large enough to fit the body of the light.
Next, you need to connect the light to the boat’s electrical system. The light will come with a set of wires. You need to connect the red wire to the positive battery terminal and the black wire to the negative battery terminal.
Finally, you need to turn on the light and test it to make sure it is working properly.
Conclusion
White lights are an important safety feature for pontoon boats. By following these simple steps, you can easily install a white light on your pontoon boat and keep yourself and your passengers safe on the water.
Also Must Read This: What Is The Best Anchor To Use For A Pontoon Boat
FAQs about Where Does the White Light Go on a Pontoon Boat
Where does the white light go on a pontoon boat?
The white light on a pontoon boat is typically located at the top of the mast. It is used to signal to other boats that the pontoon boat is underway.
What is the purpose of the white light on a pontoon boat?
The white light on a pontoon boat is used to make the boat visible to other boats at night. It is required by law for all boats that are underway at night to have a white light visible from at least 1 nautical mile away.
How high should the white light be on a pontoon boat?
The white light on a pontoon boat should be at least 12 feet above the waterline. This is to ensure that it is visible from a distance.
What type of light should be used for the white light on a pontoon boat?
The white light on a pontoon boat should be a white LED light. LED lights are bright and efficient, and they last longer than other types of lights.
How do I turn on the white light on my pontoon boat?
The white light on a pontoon boat is typically controlled by a switch on the dashboard. Turning the switch on will turn the light on, and turning the switch off will turn the light off.
